Electric heater gas should not contain moisture. The drainage temperature should not exceed 40℃, and the flow rate should be adjusted according to regulations. Bearing hinges and cylinder pistons and bushings should be lubricated regularly. The working stroke adjustment nut (under the cylinder block) of the upper electrode must be tightened.
The electrode pressure of the aging furnace can be adjusted by rotating the pressure reducing valve handle to adjust the exhaust pipe of different types in the future according to the requirements of the welding specification, and a control panel needs to be installed. Production of various models on demand. Strong anti-interference ability and extremely high reliability High reliability is the key performance of electrical control equipment. Due to the continuity of the production process, various electromagnetic interferences on the production site are particularly serious. In response to this situation, the PLC programmable controller of the electric heating battery equipment adopts the large-scale integrated circuit technology, and is manufactured by a strict production process. Adopt advanced anti-jamming technology, with high reliability.
Taking reliability as the primary condition for selecting the control device, in terms of hardware, high-quality components are selected, a reasonable system structure is adopted, and the installation is reinforced and simplified, so that a series of anti-interference measures have been adopted in both hardware and software. Weldability of electric heating battery equipment The following items are the main indicators for evaluating the weldability of resistance welding: the electrical conductivity and thermal conductivity of electric heating battery equipment materials. poor.